E-Stim Systems - Electrosex Standard Pads - Self-Adhesive Electrodes - 4 pieces

Not every good electrosex electrode has to look like a futuristic device. The E-Stim Systems Standard Pads are the perfect example of this. These four square, self-adhesive electrodes measuring 50 × 50 mm are applied directly to the skin and offer a simple, versatile way to deliver electrical stimulation to various external areas of the body. No buckles, rings, or complicated setups: just stick them on, connect them, and then take your time to discover which placement feels the most exciting.
E-Stim Systems considers the Standard Pads to be the all-arounders in its line of self-adhesive electrodes. They’re large enough to distribute electrical stimulation over a reasonable area, yet compact enough to position precisely. It’s no coincidence that the manufacturer also includes this standard size with its own E-Stim power boxes.

How do self-adhesive E-Stim electrodes work?

Each Standard Pad is a monopolar electrode. This means that a single pad forms only one electrical contact point. A functioning electrical circuit requires at least two contact points. You can therefore connect two pads at the same time, but a Standard Pad can also be combined with another suitable monopolar electrode.
Each pad has a 2 mm/TENS connector. You’ll therefore need a cable with matching 2 mm pins. The appropriate connection cables are included as standard with E-Stim Systems’ power boxes.

50 × 50 mm: the versatile mid-size

E-Stim Systems manufactures self-adhesive pads in various sizes. This Standard version measures 50 × 50 mm and offers a practical middle ground. A larger contact surface typically spreads the sensation over a larger area of skin, while smaller electrodes provide a more concentrated contact point.
That is precisely why these square pads are suitable for exploring different placements. For electroplay, E-Stim Systems recommends keeping both contact points below the waist and avoiding current paths across the chest, heart, head, and neck.

You can cut them, but be careful with the conductor

An interesting advantage is that the Standard Pads can be cut to size if desired. This allows you to adjust the surface area when the full square electrode isn’t practical for the chosen position.
However, there is one important limitation: do not damage or interrupt the electrode’s central conductive connection. Also, keep in mind that a smaller contact surface area can make the stimulation feel more concentrated. Therefore, after each adjustment, start again at a low intensity and build up gradually.

Reusable with Proper Care

Although E-Stim Systems formally specifies the pads as single-use products, the manufacturer states that they can be reused multiple times if handled with care. After use, slowly peel the electrode off the skin and immediately place it back on the original plastic backing sheet. Then store the pads back in their protective packaging.
The adhesive side must remain clean. The manufacturer advises against washing these electrodes and applying conductive gel to the adhesive surface. Gel can actually damage the adhesive layer. If a pad starts to stick less well over time, E-Stim Systems notes that a few drops of plain tap water can sometimes help restore the adhesive strength to some extent.

Experimenting Safely with Placement

Apply the pads to clean, intact skin and preferably connect the cables before increasing the intensity on the power box. Make sure the two pads do not touch each other. Always start at the lowest setting and gradually increase the intensity until the stimulation feels pleasant and clearly noticeable.
Never use electrosex equipment in a way that allows the electrical current to pass through the chest, heart, neck, or head. E-Stim Systems recommends placing these pads below the waist. Stop immediately if the stimulation feels painful, sharp, or burning. Do not use the pads on irritated or damaged skin, and always follow the safety instructions for the E-Stim controller you are using.

General Features

• Type: self-adhesive electrosex electrodes
• Monopolar electrodes
• Quantity: 4 pieces
• Dimensions per pad: 50 × 50 mm
• Connection: 2 mm/TENS
• Self-adhesive and conductive surface
• Suitable for external application on intact skin
• At least two electrical contact points are required
• Can be combined with another suitable monopolar electrode
• Can be carefully cut to size without damaging the central conductor
• Reusable multiple times with careful use
• Return to the plastic backing sheet after use
• Do not use conductive gel on the adhesive layer

FAQ

Do I need two E-Stim Systems Standard Pads at the same time?
At least two contact points are required for electrostimulation. Since each Standard Pad is monopolar, you can use two pads to form a circuit. You can also combine one pad with another suitable monopolar electrode to serve as the second contact point.
What type of connector do the E-Stim Systems Standard Pads have?
Each electrode has a 2 mm/TENS connector. You will therefore need a compatible cable with 2 mm pins. E-Stim Systems includes such cables as standard with its own power boxes.
Can I reuse the E-Stim Systems Standard Pads?
The manufacturer formally specifies the pads as single-use, but notes that they can be used multiple times if handled with care. Remove them carefully, touch the adhesive side as little as possible, and place them back on the plastic backing sheet immediately after use.
Do I need to use conductive gel with the E-Stim Systems Standard Pads?
No. E-Stim Systems actually advises against using conductive gel with its self-adhesive pads. If the adhesive strength diminishes over time, a few drops of tap water can sometimes help to slightly reactivate the adhesive layer.
The E-Stim Systems Standard Pads prove that a simple little square can be surprisingly versatile: four reusable contact points that let you experiment to your heart’s content with position and intensity. We ship them quickly and in discreet packaging, so only you need to know what those innocent little squares are really for.