E-Stim Systems - ElectroRing Extension Block - 30 mm Spacer
SKU MRB-673151
Original price
€19,95
-
Original price
€19,95
Original price
€19,95
€19,95
-
€19,95
Current price
€19,95
Sometimes the desired extension isn’t achieved by adding more rings, but simply by creating a little extra space between them. The E-Stim Systems ElectroRing Extension Block is a 30-mm-long spacer for the modular ElectroRing System. It replaces the standard separator block, thereby increasing the distance between the two ElectroRings. This is useful when the standard configuration is too compact and you’d prefer to position the front and rear rings a little farther apart.
The principle remains the same: two metal ElectroRings are physically connected by a non-conductive spacer, while remaining electrically isolated from each other. This allows you to maintain two separate contact zones for bipolar e-stim. Only the distance changes. It’s a minor adjustment to the kit, but sometimes those extra millimeters make all the difference.
The block replaces the standard spacer of the ElectroRing System. So you do not use both spacers in succession. The original separator is removed, and the 30 mm Extension Block takes its place.
The two ElectroRings remain connected as a single unit but are spaced further apart.
However, not every anatomy fits comfortably within the same standard distance. E-Stim Systems therefore offers this longer Extension Block for users who need more space between the two rings.
The manufacturer simply describes it as a longer separator for those who are a bit more generously proportioned. British understatement in a nutshell; the Extension Block simply does its job.
As a result, both rings can continue to form two separate electrical contact zones. In a normal bipolar configuration, you connect one 4 mm cable plug to one ElectroRing and the other plug to the second ring.
The electrical signal can then flow between the two contact zones. The Extension Block therefore changes the physical distance between the rings, not the electrical principle of the system.
You can therefore use the Extension Block regardless of which two available ring diameters you combine within your ElectroRing System.
This aligns perfectly with the modular concept behind the system: first, you determine which diameters fit, then you can adjust the distance between them.
The 30 mm Extension Block is intended as a longer alternative to that standard spacer. This places the front ElectroRing farther away from the rear ring.
If you have enough space with the original spacer, an Extension Block isn’t necessary. It’s specifically designed to adjust the system’s fit when additional spacing is desired.
The Extension Block is a longer spacer between two ElectroRings. The number of rings therefore remains two.
The Stacker, on the other hand, is designed to add an extra ElectroRing to an existing setup. One Stacker provides space for one additional ring.
In short: the Extension Block allows you to space two rings further apart; a Stacker lets you add a third ring. This prevents you from accidentally starting a complete ElectroRing construction project when you were only looking for a few extra centimeters of space.
It consists solely of the longer separator block. You use it in combination with the ElectroRings and the appropriate mounting hardware from your existing ElectroRing System.
If you’re starting completely from scratch, you’ll need more than just this Extension Block. You’ll need two compatible ElectroRings and the necessary mounting hardware to build a complete system.
This means you don’t have to purchase a completely new ElectroRing System if the only issue is that the distance between the rings isn’t optimal.
That is precisely where the strength of the modular design lies: a relatively small component can change the geometry of the entire assembly.
This allows you not only to choose the inner diameter of the rings but also to adjust their relative positioning and the number of contact points.
The Extension Block is one of the simplest accessories in this family: no cable, no electronics, and no extra electrode. Just 30 mm of extra spacing where needed.
E-Stim Systems recommends that an ElectroRing fit snugly without being too tight. A metal ring that is too small can cause unwanted compression, while a ring that is too loose may not make sufficiently even skin contact and can cause hotspots during e-stim.
The Extension Block therefore solves a problem with the distance between the rings; it does not correct an incorrectly chosen inner diameter.
The Extension Block replaces the standard spacer of the ElectroRing System and creates more distance between the two ElectroRings. It is intended for users who want more space between the front and rear rings within the standard configuration.
Does the E-Stim Systems ElectroRing Extension Block 30 mm add an extra ElectroRing?
No. The Extension Block only changes the distance between two existing ElectroRings. If you want to add a third or subsequent ElectroRing, you’ll need an ElectroRing System Stacker.
Does the E-Stim Systems ElectroRing Extension Block 30 mm fit all ElectroRings?
Yes. According to the product specifications, the Extension Block is compatible with all E-Stim Systems ElectroRings. This allows you to combine different available ring diameters while still utilizing the greater distance provided by the Extension Block.
Does the E-Stim Systems ElectroRing Extension Block 30 mm come with rings and screws?
No. You’ll receive only the 30 mm Extension Block. ElectroRings and mounting screws are not included. The product is primarily intended as an extension for an existing ElectroRing System in which you already have these components.
With the E-Stim Systems ElectroRing Extension Block, you can simply give two ElectroRings a little more space. No complicated electronics—just 30 mm of extra distance that can significantly change the fit of your existing system. We ship this genuine E-Stim accessory quickly, carefully, and in completely discreet packaging.
The principle remains the same: two metal ElectroRings are physically connected by a non-conductive spacer, while remaining electrically isolated from each other. This allows you to maintain two separate contact zones for bipolar e-stim. Only the distance changes. It’s a minor adjustment to the kit, but sometimes those extra millimeters make all the difference.
30 mm spacer for the ElectroRing System
The Extension Block is 30 mm long. E-Stim Systems developed this longer separator block for users who want to create more distance between the two ElectroRings in their system.The block replaces the standard spacer of the ElectroRing System. So you do not use both spacers in succession. The original separator is removed, and the 30 mm Extension Block takes its place.
The two ElectroRings remain connected as a single unit but are spaced further apart.
More distance between the two ElectroRings
In the standard ElectroRing System, two rings are typically combined: a larger ring for placement behind the penis and testicles and a smaller ring around the shaft of the penis.However, not every anatomy fits comfortably within the same standard distance. E-Stim Systems therefore offers this longer Extension Block for users who need more space between the two rings.
The manufacturer simply describes it as a longer separator for those who are a bit more generously proportioned. British understatement in a nutshell; the Extension Block simply does its job.
The electrical function remains the same
The Extension Block does not alter the basic principle of the ElectroRing System. The spacer is non-conductive and keeps the two metal ElectroRings electrically separated from each other.As a result, both rings can continue to form two separate electrical contact zones. In a normal bipolar configuration, you connect one 4 mm cable plug to one ElectroRing and the other plug to the second ring.
The electrical signal can then flow between the two contact zones. The Extension Block therefore changes the physical distance between the rings, not the electrical principle of the system.
Compatible with all E-Stim ElectroRings
According to the specifications, the Extension Block is compatible with all E-Stim Systems ElectroRings. The individual ElectroRings are available in various inner diameters, allowing you to choose the front and rear rings independently of each other.You can therefore use the Extension Block regardless of which two available ring diameters you combine within your ElectroRing System.
This aligns perfectly with the modular concept behind the system: first, you determine which diameters fit, then you can adjust the distance between them.
Extension Block vs. the Standard Spacer
The main difference lies in the length. The ElectroRing System comes standard with a separator block that connects two rings.The 30 mm Extension Block is intended as a longer alternative to that standard spacer. This places the front ElectroRing farther away from the rear ring.
If you have enough space with the original spacer, an Extension Block isn’t necessary. It’s specifically designed to adjust the system’s fit when additional spacing is desired.
Not the Same as the ElectroRing Stacker
The difference between the ElectroRing System Stacker and the Extension Block is important. Both accessories create space within the ElectroRing platform, but they serve different functions.The Extension Block is a longer spacer between two ElectroRings. The number of rings therefore remains two.
The Stacker, on the other hand, is designed to add an extra ElectroRing to an existing setup. One Stacker provides space for one additional ring.
In short: the Extension Block allows you to space two rings further apart; a Stacker lets you add a third ring. This prevents you from accidentally starting a complete ElectroRing construction project when you were only looking for a few extra centimeters of space.
Mounting hardware is not included
An important detail about this product: the Extension Block is shipped without ElectroRings or mounting screws.It consists solely of the longer separator block. You use it in combination with the ElectroRings and the appropriate mounting hardware from your existing ElectroRing System.
If you’re starting completely from scratch, you’ll need more than just this Extension Block. You’ll need two compatible ElectroRings and the necessary mounting hardware to build a complete system.
Convenient as an extension of an existing system
For someone who already owns a complete ElectroRing System, using it is much simpler. You disassemble the existing structure, replace the standard separator block with the 30 mm Extension Block, and reassemble the rings using the existing mounting hardware.This means you don’t have to purchase a completely new ElectroRing System if the only issue is that the distance between the rings isn’t optimal.
That is precisely where the strength of the modular design lies: a relatively small component can change the geometry of the entire assembly.
Part of the modular ElectroRing platform
E-Stim Systems has now built a fairly extensive modular system around the ElectroRing. In addition to individual ElectroRings, there is the standard ElectroRing System, replacement fasteners, various spacers, the Extension Block, Stackers, and the more comprehensive Ring Rack.This allows you not only to choose the inner diameter of the rings but also to adjust their relative positioning and the number of contact points.
The Extension Block is one of the simplest accessories in this family: no cable, no electronics, and no extra electrode. Just 30 mm of extra spacing where needed.
Pay attention to the size of your ElectroRings
A longer spacer block does not change the required ring diameters. Therefore, check separately to ensure that both ElectroRings fit properly.E-Stim Systems recommends that an ElectroRing fit snugly without being too tight. A metal ring that is too small can cause unwanted compression, while a ring that is too loose may not make sufficiently even skin contact and can cause hotspots during e-stim.
The Extension Block therefore solves a problem with the distance between the rings; it does not correct an incorrectly chosen inner diameter.
General Features
- Brand: E-Stim Systems
- Product: ElectroRing Extension Block
- Type: longer spacer / separator for the ElectroRing System
- Length: 30 mm
- Creates more distance between two ElectroRings
- Replaces the standard separator block
- Physically keeps both ElectroRings separate from each other
- Maintains electrical insulation between the two metal rings
- The number of ElectroRings remains two
- Compatible with all E-Stim Systems ElectroRings
- Suitable for various combinations of ring diameters
- Part of the modular ElectroRing System
- Not an electrode
- No electrical connection
- ElectroRings not included
- Mounting screws not included
- Powerbox and cables not included
- Manufacturer’s warranty: 6 months
FAQ
What is the E-Stim Systems ElectroRing Extension Block 30 mm used for?The Extension Block replaces the standard spacer of the ElectroRing System and creates more distance between the two ElectroRings. It is intended for users who want more space between the front and rear rings within the standard configuration.
Does the E-Stim Systems ElectroRing Extension Block 30 mm add an extra ElectroRing?
No. The Extension Block only changes the distance between two existing ElectroRings. If you want to add a third or subsequent ElectroRing, you’ll need an ElectroRing System Stacker.
Does the E-Stim Systems ElectroRing Extension Block 30 mm fit all ElectroRings?
Yes. According to the product specifications, the Extension Block is compatible with all E-Stim Systems ElectroRings. This allows you to combine different available ring diameters while still utilizing the greater distance provided by the Extension Block.
Does the E-Stim Systems ElectroRing Extension Block 30 mm come with rings and screws?
No. You’ll receive only the 30 mm Extension Block. ElectroRings and mounting screws are not included. The product is primarily intended as an extension for an existing ElectroRing System in which you already have these components.
With the E-Stim Systems ElectroRing Extension Block, you can simply give two ElectroRings a little more space. No complicated electronics—just 30 mm of extra distance that can significantly change the fit of your existing system. We ship this genuine E-Stim accessory quickly, carefully, and in completely discreet packaging.